|
Plastisizer
Plastisizer
is a is a plasterizing polymer for enhancing the
shells structure of aphrons used in APHRON waterbase
fluid technologies. When used in conjunction with
Blue Streak,
ActiGuard, Aphronizer
A and Plastisizer the
resultant aphrons show significant resistance to
compression as well as improved sealing performance
when compared to our first generation aphrons built
with Blue Streak
alone.
Typical
Physical Properties
| Form |
Liquid
|
| Color |
Yellow |
| Specific
gravity |
0.981
@ 68 Fº |
| pH
(1% in water) |
Not
determined |
| Solubility |
Insoluble
|
Applications
Initial treatment of APHRON ICS™ waterbase
fluid technologies with Plastisizer
is typically with 0.3 pounds per barrel. Once the
system has stabilized additional Plastisizer
should be added at a 1.0 : 0.3 pounds per barrel
ratio (Blue Streak
to Plastisizer) until a 12 - 14 %
by volume aphron concentration is achieved in the
circulating system.
Advantages
- Enhanced
APHRON ICS™
waterbase fluid sealing performance
-
No negative effect on the APHRON ICS™
waterbase fluid rheology performance (LSRV)
- Sealing by the "Jamin effect"
- "Micro-environment"
sealing
-
No or very low solids content fluids
-
Minimally invasive fluids
-
Improved Loss Circulation Control
-
No differential sticking
-
Quality cement bonds
-
Optimized well construction costs
See the Material
Safety Data Sheet for more detailed information
concerning storage, handling, transportation, disposal
and safety requirements.
Packaging
and Storage
Plastisizer is packaged in a special 5.0 gallon
plastic pail designed to protect the product from
moisture.
No
claim of personal safety is intended nor
implied by the use of the name Safe in this
product. Personnel handling this material
should read and follow all safety and handling
procedures set forth on the Material Safety
Data Sheet.
|
|
